Design Summary

Front Back

General

Design Name
EsltController_nano.zip
Designer
Design Upload Date
2019-03-29 14:05:32
Board Dimensions
5.08 by 5.08 cm
Open Source
Yes
License
Creative Commons Attribution 4.0 International

PCB Properties

Copper Layers
2
Thickness
1.6 mm
Minimum Trace/Spacing
6/6 mil
Minimum Hole Size
0.3 mm
Impedance Control
No
Soldermask Colour
Green
Silkscreen Colour
White
Surface Finish
HASL (with lead)
Copper Weight
1 oz
Cost of 5 PCBs

Designer's Description

Estlcam defines pinouts for a controller. This board is for an Arduino Nano. Outpus (Spindle is 3 pin) go to 4pin 'Axis' connectors. Inputs (4) go to 2-pin plugs with pullups and caps. Analog 6 is output to a 3 pin connector

There is a connector for a HC-05 module. Tx and Rx Jumpers chose pin selection. D0-Rx-D3 and D1-Tx-D2 if using with USB port to monitor. (Beware D2 and D3 are used by Estlcam).

For NON ESTLCAM uses there is a I2C connector (uses A4 and A5)

Renderings

Front

Front

This is a rendering of the front of your PCB.

Back

Back

This is a rendering of the back of your PCB.

Layer Renderings

Outline

Outline

Top Copper

Top Copper

Bottom Copper

Bottom Copper

Drill File

Drill File

Top Soldermask

Top Soldermask

Bottom Soldermask

Bottom Soldermask

Top Silkscreen

Top Silkscreen

Bottom Silkscreen

Bottom Silkscreen